Review





Similar Products

dicom scans  (Oxford Instruments)
99
Oxford Instruments dicom scans
We illustrate <t>how</t> <t>PET/CT</t> scans are typically analyzed with Invicro VivoQuant, the standard proprietary packages for PET/CT data analysis ( A ), and with Imaris, proprietary packages typically used for fluorescent microscopy data analysis ( B ). A : With Invicro VivoQuant (i-iv) , the operator analyzes reconstructed 3D images by using 2D slices and manually labeling contours of the lesions, defined by PET signal. Invicro VivoQuant then provides various SUV characteristics, such as max SUV, for ether individual lesions or the whole lung. B : With Imaris (i-vi) , PET/CT <t>DICOM</t> files are imported as 2-channel images, and scans done at different times can be incorporated into the same Imaris file by adding new time frames. Then scans for different time points are aligned using “Correct for drift” routine by using landmarks (6 locations of spine vertebra). Then region of interest ( ROI ) is then identified around each suspected lesion and the data in ROI is processed using 3D routine “Surfaces”. All lesions then can be grouped into the specific group depending on the location of the lesion (e.g., lung vs. lymph nodes).
Dicom Scans, supplied by Oxford Instruments, used in various techniques. Bioz Stars score: 99/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/dicom+scans/Imaris/bio_rxiv__2025__07__04__663191-31-3-9
Average 99 stars, based on 1 article reviews
dicom scans - by Bioz Stars, 2026-10
99/100 stars
  Buy from Supplier
dicom images from philips mx 16 ct scan  (Philips Healthcare)
90
Philips Healthcare dicom images from philips mx 16 ct scan
We illustrate <t>how</t> <t>PET/CT</t> scans are typically analyzed with Invicro VivoQuant, the standard proprietary packages for PET/CT data analysis ( A ), and with Imaris, proprietary packages typically used for fluorescent microscopy data analysis ( B ). A : With Invicro VivoQuant (i-iv) , the operator analyzes reconstructed 3D images by using 2D slices and manually labeling contours of the lesions, defined by PET signal. Invicro VivoQuant then provides various SUV characteristics, such as max SUV, for ether individual lesions or the whole lung. B : With Imaris (i-vi) , PET/CT <t>DICOM</t> files are imported as 2-channel images, and scans done at different times can be incorporated into the same Imaris file by adding new time frames. Then scans for different time points are aligned using “Correct for drift” routine by using landmarks (6 locations of spine vertebra). Then region of interest ( ROI ) is then identified around each suspected lesion and the data in ROI is processed using 3D routine “Surfaces”. All lesions then can be grouped into the specific group depending on the location of the lesion (e.g., lung vs. lymph nodes).
Dicom Images From Philips Mx 16 Ct Scan, supplied by Philips Healthcare, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/dicom+scans/mx16+ct/pm39999748-105-1-4
Average 90 stars, based on 1 article reviews
dicom images from philips mx 16 ct scan - by Bioz Stars, 2026-10
90/100 stars
  Buy from Supplier
cbct scans in dicom format  (MathWorks Inc)
90
MathWorks Inc cbct scans in dicom format
We illustrate <t>how</t> <t>PET/CT</t> scans are typically analyzed with Invicro VivoQuant, the standard proprietary packages for PET/CT data analysis ( A ), and with Imaris, proprietary packages typically used for fluorescent microscopy data analysis ( B ). A : With Invicro VivoQuant (i-iv) , the operator analyzes reconstructed 3D images by using 2D slices and manually labeling contours of the lesions, defined by PET signal. Invicro VivoQuant then provides various SUV characteristics, such as max SUV, for ether individual lesions or the whole lung. B : With Imaris (i-vi) , PET/CT <t>DICOM</t> files are imported as 2-channel images, and scans done at different times can be incorporated into the same Imaris file by adding new time frames. Then scans for different time points are aligned using “Correct for drift” routine by using landmarks (6 locations of spine vertebra). Then region of interest ( ROI ) is then identified around each suspected lesion and the data in ROI is processed using 3D routine “Surfaces”. All lesions then can be grouped into the specific group depending on the location of the lesion (e.g., lung vs. lymph nodes).
Cbct Scans In Dicom Format, supplied by MathWorks Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/dicom+scans/pm39470682-45-4-9
Average 90 stars, based on 1 article reviews
cbct scans in dicom format - by Bioz Stars, 2026-10
90/100 stars
  Buy from Supplier
dicom data of ct scan  (Anatomage Inc)
90
Anatomage Inc dicom data of ct scan
We illustrate <t>how</t> <t>PET/CT</t> scans are typically analyzed with Invicro VivoQuant, the standard proprietary packages for PET/CT data analysis ( A ), and with Imaris, proprietary packages typically used for fluorescent microscopy data analysis ( B ). A : With Invicro VivoQuant (i-iv) , the operator analyzes reconstructed 3D images by using 2D slices and manually labeling contours of the lesions, defined by PET signal. Invicro VivoQuant then provides various SUV characteristics, such as max SUV, for ether individual lesions or the whole lung. B : With Imaris (i-vi) , PET/CT <t>DICOM</t> files are imported as 2-channel images, and scans done at different times can be incorporated into the same Imaris file by adding new time frames. Then scans for different time points are aligned using “Correct for drift” routine by using landmarks (6 locations of spine vertebra). Then region of interest ( ROI ) is then identified around each suspected lesion and the data in ROI is processed using 3D routine “Surfaces”. All lesions then can be grouped into the specific group depending on the location of the lesion (e.g., lung vs. lymph nodes).
Dicom Data Of Ct Scan, supplied by Anatomage Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/dicom+scans/dicom+files/pm37543211-46-12-34
Average 90 stars, based on 1 article reviews
dicom data of ct scan - by Bioz Stars, 2026-10
90/100 stars
  Buy from Supplier
dicom images of pet/ct scan  (Philips Healthcare)
90
Philips Healthcare dicom images of pet/ct scan
We illustrate <t>how</t> <t>PET/CT</t> scans are typically analyzed with Invicro VivoQuant, the standard proprietary packages for PET/CT data analysis ( A ), and with Imaris, proprietary packages typically used for fluorescent microscopy data analysis ( B ). A : With Invicro VivoQuant (i-iv) , the operator analyzes reconstructed 3D images by using 2D slices and manually labeling contours of the lesions, defined by PET signal. Invicro VivoQuant then provides various SUV characteristics, such as max SUV, for ether individual lesions or the whole lung. B : With Imaris (i-vi) , PET/CT <t>DICOM</t> files are imported as 2-channel images, and scans done at different times can be incorporated into the same Imaris file by adding new time frames. Then scans for different time points are aligned using “Correct for drift” routine by using landmarks (6 locations of spine vertebra). Then region of interest ( ROI ) is then identified around each suspected lesion and the data in ROI is processed using 3D routine “Surfaces”. All lesions then can be grouped into the specific group depending on the location of the lesion (e.g., lung vs. lymph nodes).
Dicom Images Of Pet/Ct Scan, supplied by Philips Healthcare, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/dicom+scans/dicom+images/pmc11440856-123-3-8
Average 90 stars, based on 1 article reviews
dicom images of pet/ct scan - by Bioz Stars, 2026-10
90/100 stars
  Buy from Supplier
thin-layer scanning dicom data  (Siemens Healthineers)
90
Siemens Healthineers thin-layer scanning dicom data
We illustrate <t>how</t> <t>PET/CT</t> scans are typically analyzed with Invicro VivoQuant, the standard proprietary packages for PET/CT data analysis ( A ), and with Imaris, proprietary packages typically used for fluorescent microscopy data analysis ( B ). A : With Invicro VivoQuant (i-iv) , the operator analyzes reconstructed 3D images by using 2D slices and manually labeling contours of the lesions, defined by PET signal. Invicro VivoQuant then provides various SUV characteristics, such as max SUV, for ether individual lesions or the whole lung. B : With Imaris (i-vi) , PET/CT <t>DICOM</t> files are imported as 2-channel images, and scans done at different times can be incorporated into the same Imaris file by adding new time frames. Then scans for different time points are aligned using “Correct for drift” routine by using landmarks (6 locations of spine vertebra). Then region of interest ( ROI ) is then identified around each suspected lesion and the data in ROI is processed using 3D routine “Surfaces”. All lesions then can be grouped into the specific group depending on the location of the lesion (e.g., lung vs. lymph nodes).
Thin Layer Scanning Dicom Data, supplied by Siemens Healthineers, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/dicom+scans/dicom+images/pmc09845617-83-7-19
Average 90 stars, based on 1 article reviews
thin-layer scanning dicom data - by Bioz Stars, 2026-10
90/100 stars
  Buy from Supplier
dicom files generated from ct scans  (COMSOL Inc)
90
COMSOL Inc dicom files generated from ct scans
We illustrate <t>how</t> <t>PET/CT</t> scans are typically analyzed with Invicro VivoQuant, the standard proprietary packages for PET/CT data analysis ( A ), and with Imaris, proprietary packages typically used for fluorescent microscopy data analysis ( B ). A : With Invicro VivoQuant (i-iv) , the operator analyzes reconstructed 3D images by using 2D slices and manually labeling contours of the lesions, defined by PET signal. Invicro VivoQuant then provides various SUV characteristics, such as max SUV, for ether individual lesions or the whole lung. B : With Imaris (i-vi) , PET/CT <t>DICOM</t> files are imported as 2-channel images, and scans done at different times can be incorporated into the same Imaris file by adding new time frames. Then scans for different time points are aligned using “Correct for drift” routine by using landmarks (6 locations of spine vertebra). Then region of interest ( ROI ) is then identified around each suspected lesion and the data in ROI is processed using 3D routine “Surfaces”. All lesions then can be grouped into the specific group depending on the location of the lesion (e.g., lung vs. lymph nodes).
Dicom Files Generated From Ct Scans, supplied by COMSOL Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/dicom+scans/dicom+files+generated+from+ct+scans/us11357890-683-4-34
Average 90 stars, based on 1 article reviews
dicom files generated from ct scans - by Bioz Stars, 2026-10
90/100 stars
  Buy from Supplier
ct scans dicom format  (Autodesk Inc)
90
Autodesk Inc ct scans dicom format
We illustrate <t>how</t> <t>PET/CT</t> scans are typically analyzed with Invicro VivoQuant, the standard proprietary packages for PET/CT data analysis ( A ), and with Imaris, proprietary packages typically used for fluorescent microscopy data analysis ( B ). A : With Invicro VivoQuant (i-iv) , the operator analyzes reconstructed 3D images by using 2D slices and manually labeling contours of the lesions, defined by PET signal. Invicro VivoQuant then provides various SUV characteristics, such as max SUV, for ether individual lesions or the whole lung. B : With Imaris (i-vi) , PET/CT <t>DICOM</t> files are imported as 2-channel images, and scans done at different times can be incorporated into the same Imaris file by adding new time frames. Then scans for different time points are aligned using “Correct for drift” routine by using landmarks (6 locations of spine vertebra). Then region of interest ( ROI ) is then identified around each suspected lesion and the data in ROI is processed using 3D routine “Surfaces”. All lesions then can be grouped into the specific group depending on the location of the lesion (e.g., lung vs. lymph nodes).
Ct Scans Dicom Format, supplied by Autodesk Inc, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
https://www.bioz.com/product/dicom+scans/ct+scans+dicom+format/pmc08808983-16-9-33
Average 90 stars, based on 1 article reviews
ct scans dicom format - by Bioz Stars, 2026-10
90/100 stars
  Buy from Supplier

Image Search Results


We illustrate how PET/CT scans are typically analyzed with Invicro VivoQuant, the standard proprietary packages for PET/CT data analysis ( A ), and with Imaris, proprietary packages typically used for fluorescent microscopy data analysis ( B ). A : With Invicro VivoQuant (i-iv) , the operator analyzes reconstructed 3D images by using 2D slices and manually labeling contours of the lesions, defined by PET signal. Invicro VivoQuant then provides various SUV characteristics, such as max SUV, for ether individual lesions or the whole lung. B : With Imaris (i-vi) , PET/CT DICOM files are imported as 2-channel images, and scans done at different times can be incorporated into the same Imaris file by adding new time frames. Then scans for different time points are aligned using “Correct for drift” routine by using landmarks (6 locations of spine vertebra). Then region of interest ( ROI ) is then identified around each suspected lesion and the data in ROI is processed using 3D routine “Surfaces”. All lesions then can be grouped into the specific group depending on the location of the lesion (e.g., lung vs. lymph nodes).

Journal: bioRxiv

Article Title: Using Imaris to rigorously track PET-defined sites of lung inflammation in Mycobacterium tuberculosis -exposed non-human primates

doi: 10.1101/2025.07.04.663191

Figure Lengend Snippet: We illustrate how PET/CT scans are typically analyzed with Invicro VivoQuant, the standard proprietary packages for PET/CT data analysis ( A ), and with Imaris, proprietary packages typically used for fluorescent microscopy data analysis ( B ). A : With Invicro VivoQuant (i-iv) , the operator analyzes reconstructed 3D images by using 2D slices and manually labeling contours of the lesions, defined by PET signal. Invicro VivoQuant then provides various SUV characteristics, such as max SUV, for ether individual lesions or the whole lung. B : With Imaris (i-vi) , PET/CT DICOM files are imported as 2-channel images, and scans done at different times can be incorporated into the same Imaris file by adding new time frames. Then scans for different time points are aligned using “Correct for drift” routine by using landmarks (6 locations of spine vertebra). Then region of interest ( ROI ) is then identified around each suspected lesion and the data in ROI is processed using 3D routine “Surfaces”. All lesions then can be grouped into the specific group depending on the location of the lesion (e.g., lung vs. lymph nodes).

Article Snippet: Upon import of DICOM scans (CT + PET) in Imaris, scan signals are converted into channel intensities.

Techniques: Positron Emission Tomography-Computed Tomography, Microscopy, Labeling